OCEANSERVE S.A.DE C.V.®
Represents shipping companies with the inspection of vessels.
CARGO
Inspection / supervision of cargo involved in accidents during maritime, rail, or ground transportation. Cargo can be inspected in the facilities of the client, port or bonded warehouses in the presence of the container or when the cargo has already been discharged and has been stored.
BUNKER FUEL QUANTITY SURVEY
The quantity of all fluids is determined as: oil, diesel fuel, fresh water, salt water, etc.
Condition survey of Vessel & Evaluation (INSPECTION condition of the ship and valuation)
A thorough inspection of every part of the boat is made to determine the amount of repairs (maintenance) needed, as it can be: painting, welding, flat, motor, warehouses, etc. If required by our client an assessment of the necessary repairs are made.
DRAFT SURVEY
There are three stages in this type of inspection: initial, intermediate and final.
Hold cleanliness certification
A thorough inspection of the holds is done to verify that they are in good condition for the intake charge.
HOLD HATCHES
After loading of the vessel’s cargo of any kind, special seals are placed on the hatches of the vessel.
ON HIRE & OF HIRE SURVEY
On Hire Survey (vessel Inspection conditions for initial use of charterers)
An inspection of the general conditions is performed prior to delivery to charterers Off Hire Survey (vessel Inspection conditions for final delivery of charterers). An inspection of the general condition of the vessel to be received by the charterers is performed, to perform.
MAINTENANCE REQUIRED
Pre Discharge and Discharge (cargo inspection before and during discharge)
Cargo is inspected before unloading the vessel to verify that all cargo arrived in good condition at its maritime transport. After downloading the entire vessel is inspected to ensure that does not happen any damage to the cargo during unloading. It is noteworthy that the pre discharge and discharge inspection survey, may be required if you separate the needs of our client.
PRE LOADING AND LOADING (Inspection vessel loading)
Cargo is inspected before and during loading of the vessel to verify that everything stored in the cellars of this vessel in good condition. It is noteworthy that the pre loading and loading inspection survey, may be required if you separate the needs of our client.
TEST OF HOLD (water testing on hatch covers)
Hatches are closed and water under pressure in poured to check the water tightness of the vessel’s hold.